Pin Planter

• Product Name:

  Pin Planter

• Category: Others
• Price: Get Latest Price

• Product Detials:

  Voltage:220V/110V 50-60Hz
  Power: 180w
  Speed:2800rpm
  G.W:12kg

  1.Instruction

  Our PIN PLANTER(Type SJK05) is a special precise equipment for odontology, using a laser to guarantee, the holes accuracy. This machine uses hardened alloy drill bits, the depth of the drilled holes can be adjusted.

  2.Technical Data

       Electrical Power:110V/50HZ,60W

       Rotation Speed: 4500~5000 rmp

       Drill bit diameter: 1.85, 3* 1.95

       Total machine dimensions:140*150*320mm

  3.How to use

  Connect to 110VAC and switch on power. The indicator light will light up. At the same time, the red laser will be on (2~2.5). Adjust the drilling depth to your needs and put your plaster model inside the machine. Then you can drill and machining.

  Special Notice: before and during the drilling process, the plaster model should be fixed by hands until the drilling process is finished. Otherwise the drill bit may break or the hold may not be drilled exactly.

  4.How to exchange the laser head

  Disconnect the power and open the bottom cover, untight the laser head and take it out. You need to cut the connection wires(red and white), but make sure that the white wire is 20mm shorter than the red one. Slide hear shrink tube to the wires of the new laser head and solder it to the connection wires of the machine and heat it up for isolation. Push the wires back into the machine and put the laser head back into position, then fits again. After adjustment, tighten the four screws again.

  5. How to exchange the drill bit

  Disconnect the power and put down the latex chalk box. You will need two spanners, one to fix the axis and one to unscrew the drill head, loose the head and exchange the drill bit(make sure to insert it deep enough into the head). Then fix the drill bit again, using the two spanners.

  6.Specification

  Rated Voltage/	Rated current	Rated frequency	Rated power
  220V	1A	50HZ	150W
  110V	2A	60HZ	150W