Infant Incubator (SKME-B-2000)

• Product Name:

  Infant Incubator (SKME-B-2000)

• Category: Medical devices/Diagnostic Devices
• Price: Get Latest Price

• Product Detials:Specifications:
  Model: B-2000
  Power
  Power requirements: AC220v 10%, 50Hz 2%
  Power input: ≤ 450va
  Refer to iec60601-1, this equipment belongs to class I, type b. Its operation is continuous.
  Alarm
  Power alarm
  Power failure: Activates if primary power to the incubator
  Fails or the power wire is accidentally
  Disconnected from the wall receptacle.
  
  Fan alarm
  Fan failure: Activates if fan motor malfunctions. Sensor alarm
  Air sensor failure: Air sensor malfunction, refer unit to service.
  Sensor out of position: Activated when sensor is not in correct position to perform calibration or continue operation.
  Skin sensor disconnected: Activated during skin control mode when skin sensor is disconnected from temperature controller. Skin sensor failure: Activated when skin sensor malfunctions.
  Deviation alarm high air temperature: Activated if displayed air temperature is 1.5 centigrade above set point
  Low air temperature: Activated if displayed air temperature 2.5centigrade below set point
  
  Skin temperature: Activated if displayed skin temperature is 1.0 centigrade above set point
  Low skin temperature: Activated if displayed skin temperature is 1.0over temperature alarm
  Over air temperature: Activated when displayed air temperaturewas approach 38centigrade for set temperature ≤ 37centigrade, or approach 40centigrade for set temperature >37centigrade in air mode.
  
  Over skin temperature: Activated when displayed skin temperature was approach 38centigrade for set temperature ≤ 37centigrade, or approach 39centigrade for set temperature >37centigrade in skin mode. System alarm
  System failure: Activated if temperature control system malfunctions.
  
  Temperature controlrangeand correlative specifications
  Air temperature: 20centigrade ~37centigrade, for set temperature ≤ 37centigrade
  37centigrade ~39centigrade, for set temperature >37centigrade
  Skin temperature: 20centigrade ~37centigrade, for set temperature ≤ 37centigrade
  37centigrade~38centigrade, for set temperature >37centigrade
  Temperature rise time: ≤ 30min
  Temperature variability: 0.5centigrade
  Temperature uniformity: ≤ 1 centigrade
  Skin sensor precision: ≤ 0.3centigrade
  
  Environment requirement
  Environment temperature
  Operation temperature range+20centigrade ~+30centigrade
  Store temperature range -40centigrade ~+70centigrade
  Environment humidity
  Operation humidity range: 30%~75%
  Store humidity range: ≤ 80%
  Atmospheric pressure range: 500hpa~1060hpa
  
  Other specification
  Noise level within hood environment ≤ 55dB(environment noise below 45dB carbon dioxide (CO2) level within the hood less than 0.5% when a mixture of CO2
  
  In air is delivered at 750ml/min
  At point 10cm above the center of the mattress.
  Air velocit y over mattress less than: 0.35m/s
  Infant bed max load: 10kg
  Transfusion shelf max load: 2kg
  Shelf max load:
  Cabinet max load: 6kg