Chromatography Apparatus (IC-100PRO)

• Product Name:

  Chromatography Apparatus (IC-100PRO)

• Category: Others
• Package: Carton or boarding ark
• Price: Get Latest Price

• Product Detials:

  Chromatography(IC-100PRO) Designed specifically for routine analysis,Designed specifically for routine analysis that increases sample throughput. .Advanced single-range digital output provides a full range for your ion analysis needs.Whether in low or high concentrations, ions of interest are easily identified in this detection range.IC-100PRO adopts complete polymeric systems constructed of PEEK materials.Metal-free materials prevent the acid and base mobile phases traditionally used in IC analysis from contaminating and corroding the system.The PEEK material used provides a chemically inert pump and system flow path compatible with aqueous eluents of pH 0-14. Maintaining your system is simplified with materials that do not promote problems in the system.You can expect lower maintenance cost with the use of factory-equipped piston seal wash.This standard feature protects the dual-piston pumping system between routine maintenance cycles by rinsing the pistons and rearseals,continuously with DI water.The PEEK tubing used to plumb the system is easy to use and cut for fast replacement or plumbing flexibility.The IC-100PRO areconfigured and ready for your most challenging anion or cation analysis.

  Type	Serial dual-reciprocating pistons, microprocessor-controlled constant stroke, variable speed
  Construction	Chemically inert, metal-free PEEK pump heads and flow paths compatible with aqueous eluents of pH 014 and reversed-phase solvents
  Control mode	Full control through front panel
  Maximum operating pressure	45 MPa
  Pressure ripple	<1.0 % from 0.4 to 2.0 mL/min at 10003000 psi
  Flow rate range	0.019.99 mL/min in 0.01 increments, typical operating range is 0.42.0 mL/min
  Flow precision	± 0.1 %
  Flow accuracy	± 0.05 %
  System Flow Constancy	Typically < 0.1 %
  Piston seal wash	Dual-pump head, wash can be continuous when connected to rinse solution supply
  Pressure alarm limits	Upper limit 045 MPa or 06400 psi in one unit (MPa or psi) increments, lower limit can be set up to one unit lower than upper limit

   2. Conductivity Detector
  

  Type	Microprocessor-controlled digital signal processor
  Cell drive	8-kHz square wave
  Linearity	1% at 1 ms
  Resolution	0.1 ns
  Full-scale output ranges	Digital signal range: 015,000 µs Analog signal range: 015,000 µs
  Electronic noise	±0.1 ns when background conductivity is 0150 µs ±2 ns when background conductivity is 1513200 µs
  Filter	Rise times from 0 to 10 s, user selectable
  Temperature compensation	Fixed at 1.7% per 1 °C at cell temperature
  Temperature range	Ambient +7 °C to 55 °C
  Temperature stability	<0.01 °C
  Cell electrodes	Passivated 316 stainless steel
  Cell body	Chemically inert polymeric material
  Cell volume	<1.4 µL
  Heat exchanger	Low dispersion
  Maximum cell operating pressure	2 MPa (300 psi)
  Suppressor control	Self-Regenerating electrolytic Suppressor AES, 0150 mA in 1-mA increments SRS, 0500 mA in 1-mA increments
  Separating capacity	Analyze F - , Cl - , NO 2 - , PO 4 3- , Br - , NO 3 - , SO 4 2- , ClO 2 - , ClO 3 - , BrO 3 - in 16 minutes. Analyze Li + , Na + , NH 4 + , K + , Mg 2+ , Ca 2+ , Sr 2+ , Ba 2+ in 20 minutes.
  Lower limits of detection	<0.1ug/L (CI - ), 3ug/L (Na + )
  Linear limits	> 10 3
  Linear correlation coefficient	> 0.995
  RSD%	< 1.5% (measured by SO 4 2- )

  3. Column
  

  AN serial ion exchange column Alltech serial ion exchange column

  4. Workstation
  

  Input range: -1.3V--+1.3V Sensitivity: 0.05uV.S Frequency: 6000

  5. Physical Specifications
  

  Display	Large touch-sensitive LCD display
  Power requirements	220V±10% 50Hz / 110V±10% 60Hz
  Operating temperature	15-30 °C
  Operating humidity range	5-85% relative, noncondensing
  Control mode	Full control through front panel
  Communication protocol	RS232-USB port
  Dimensions (h × w × d)	56.1 × 22.4 × 53.3 cm (22.1 × 8.8 × 21 in.)
  Weight	24.5 kg (54 lb)

  Packing List for IC-100PRO Ion Chromatography  
  

  NO.	Name	Type	Unit	Quantity
  1	Main processor	IC-100		1
  2	O type sealing washer	φ4.5×1.5		30
  3	Simulated conductance board			1
  4	Conical column tie-in			4
  5	Four fluorin pipeline	φ1.5	Meter	3
  6	Electric iron	20W		2
  7	Flanging tip			2
  8	Injector	2ml		10
  9	Syringe needle			10
  10	Blown fuse	2A		10
  11	Lever	100×12		1
  12	Blade	One-edged		2
  13	Long nosed pliers	150mm		1
  14	Screwdriver			1
  15	Power cord			2
  16	Instruction manual			1
  17	Flow pipeline joint	M6		8
  18	Inhibitor	Self-regenerate		1
  19	Anion chromatographic column			1
  20	Chromatography working station	Including disk, signal line, manual	Set	1
  21	Certificate of quality			1
  22	Constant loaded resistance	100Ω		5
  23	Pump accessories		Bag	1